Advertisement
Quick Links
Speci cation
Voltage
Current
Operation Temperature
Charging Port
Connector Port
Cable Length
Weight
Troubleshooting
1. After connecting the Tesla charger to our adapter, please
wait 30 seconds before connecting it to the electric vehicles.
2. If you are using Tesla Destination Charger or a Tesla Wall
Connector and you see a red light blinking on the charger,
please adjust the charger current to 40A or below (i.e. set the
rotary switch to position 1-8).
3. Please make sure that the charger you are connecting to
does not exceed your EV's voltage rating.
4. Please make sure the Tesla Charger is plugged into the
adapter tightly.
Tesla Charger not included.
Lectron is not a liated with Tesla Inc.
Lectron is a trademark of Dropcases Ltd.
Tesla is a trademark of Tesla Inc.
: Max 250V AC
: Max 40 amps
: -30°C to +50°C
: SAE J1772 Standard
: Tesla US
: 3.9 inches (10cm)
: 1.83 lbs (0.83kg)
For more information, visit:
www.ev-lectron.com
or contact us at
contact@ev-lectron.com
Made in China
Page - 04
Advertisement
Related Manuals for Lectron Tesla to J1772 Adapter
Summary of Contents for Lectron Tesla to J1772 Adapter
- Page 1 EV's voltage rating. 4. Please make sure the Tesla Charger is plugged into the adapter tightly. Tesla Charger not included. Lectron is not a liated with Tesla Inc. For more information, visit: www.ev-lectron.com Lectron is a trademark of Dropcases Ltd.
- Page 2 3. Tesla Adapter 2. Plug in to your electric vehicle which supports J1772 plug and start charging. Compatibility Our Lectron J1772 Adapter is compatible with: 3. Remove the converter, either by pressing the red button Tesla High Power Destination Mobile...
Need help?
Do you have a question about the Tesla to J1772 Adapter and is the answer not in the manual?
Questions and answers