How It Works; Components; Starter Kit - Zoetis AlphaTrack3 User Manual

How It Works

AlphaTrak 3 is an easy-to-use veterinary canine and feline blood glucose monitoring system.
1 System Check Screen 5 Sample Area
This display always appears when the Sample area is the dark-colored rectangle on
meter is turned on. You should check that the test strip
the meter matches the example exactly
Apply blood or control solution to the
every time the meter turns on. Do not use
front edge of the sample area only
the meter if the display check screen does
(not on top of it)
not exactly match the example. If the screen
does not match, the meter may show an
6 m (Mode) Button
incorrect result. Please contact
•
Customer Care
•
•
2 Display Screen
•
Displays test results and other
•
important information
7 c (Configure) Button
3 Test Strip Port
•
Insert the top end of a new AlphaTrak 3 strip
•
here. The meter powers on when you insert
•
the test strip
•
4 AlphaTrak 3 Test Strip
Press m and c at the same time after glucose
Insert strip into the meter printed side up
test or when viewing record log to turn on
and following the purple arrow
Bluetooth
Hold c and press m to change species
code after inserting the test strip and
waiting on sample
For more information
www.alphatrak.com
3
Turns meter on/off
Access primary settings
Access record log
Scroll backwards
Silences alarm
Scrolls forward
Silences alarm
Access secondary settings
Marks a control solution test

Components

Starter Kit

1
AlphaTrak 3 Meter
2 50 AlphaTrak 3 Test Strips
3 Lancing Device and 30 Lancets
1
2
6 7
3
4
5
For more information
www.alphatrak.com
4
AlphaTrak 3 Control Solution (4 mL)
5 Carrying Case
6 Code Strip
5
8
1
7
2
4
3
6
9
7
Diabetes Diary
8 Quick User's Guide
9 Two Batteries (3V, CR2032)
4