Zoetis AlphaTRAK Quick User Manual

ART22860-002_rev-A.pdf 1 11/23/16 10:27 AM
Accuracy Made Easy
Quick User's Guide
AlphaTRAK 2 Meter Setup
Before performing a test, set up the volume,
time and date on your meter. With the meter off,
m
press and hold the button for 3 seconds
m
until S-E-T appears. Press to bypass the
reminder alarms.
Sound
c
To set the volume, press
No Sound Low Beep Loud Beep
Press m to save your selection.
Time
To set the time:
Hour Minutes
c
Press to change the hour and minutes.
Press m to save your selections.
m c
Press to accept time format or
Date
To set the date:
Year Month Day
To change the month, press
correct month and
the day and year.
Press m to accept date format or
To save all your settings, press and hold down
for three seconds until the meter turns off.
Your meter is now set and ready to use. Follow the
steps on the other side of the Quick User's Guide to
perform a test.
For additional information, please contact Zoetis Inc.
Customer Service at: 1-888-963-8471
www.AlphaTRAKmeter.com
www.AlphaTRAKmeter.co.uk
www.AlphaTRAKmeter.ca
to change.
ART22860-002 Rev. A 10/16
Year Day Month
c
to display the
to save it. Do the same for
m
c to change.
m
Distributed by:
Zoetis Inc.
Kalamazoo, MI 49007