Zoetis AlphaTrak3 Quick User Manual

BLOOD GLUCOSE
MONITORING SYSTEM
Quick User's Guide
Welcome to AlphaTrak 3
the next generation of the most trusted glucometer brand among
,
veterinarians in the US !
1
This Quick User´s Guide provides you with all the information you need to get started.
Please note: If you have previously used AlphaTRAK2, some of the operating steps are different for
AlphaTrak 3. Please follow all instructions to ensure a smooth transition for you and your pet.
Download the electronic AlphaTrak3 User Guide at www.alphatrak.com or access via the AlphaTrak
mobile App. You can find more information on Bluetooth setup, connection to AlphaTrak mobile App,
troubleshooting and glucose result interpretation.
Visit the www.alphatrak.com website or AlphaTrak YouTube channel for access to all AlphaTrak
resources, including How-To videos, Diabetes resources, and the Bluetooth setup guide.
Download the AlphaTrak App for your mobile device (iOS/Android) to automatically store, trend and
share your pet´s glucose results.
Veterinary professionals: Access the AlphaTrak Web App at alphatrak.zoetis.com to use on your
clinic's computer. Please use the same credentials you created for the mobile App.
The AlphaTrak App can also be fully integrated to your Practice Management Software and ZoetisDX,
if FUSE/HUB is enabled. Users can send orders and automatically store and review results in their
patient's record.
AlphaTrak 3 is intended for animal use only
AlphaTrak 3 Meter Setup
Before performing a test, set the volume, unit of measure, time, date, and
code strip on your meter.
With the meter off, press and hold the button for 3 seconds until SET
appears. Press to bypass the reminder alarms.
Sound
To change the volume, press .
No Sound Low Beep
Press to save your selection.
Unit of measure
Set unit of measure:
Note: The glucose unit is preset to mg/dL. (commonly used in the USA)
Press to change the unit to mmol/L. (commonly used outside of USA)
Press to save your preferred unit.
Date
To set the date:
OR
Year Day Month
Year Month Day
Press to change the year. Press to save.
Once month-day or day-month is flashing you can press
format. Press once desired format is flashing.
For day and month press to adjust and
Time
To set the time:
Hour Minutes
Press to change between 12h and 24h formats.
Press to select.
Press to change hours and minutes.
Press to select.
To save all your settings, press and hold down for 3 seconds until the
meter turns off.
Code Strip
Note: Before using a new vial of test strips you must confirm the Lot Code
for each species, to ensure accurate testing. You will be asked to confirm
the Lot Code.
To set the Lot Code:
Insert the Code Strip attached to the test strip vial. Press
correct code (match the code on the strip vial).
Press to save.
Make sure to store the Code Strip.
Note: After this initial code setup you can easily change the species
without the Code Strip:
After a test strip was inserted, press and hold
press to change the species.
Your meter is now set and ready to use. Follow the next steps to perform
a glucose test or control test and to learn more about how to setup
Bluetooth and connect to the mobile AlphaTrak 3 App.
Loud Beep
to adjust the
to select.
to set the
and at the same time