Insertion In Additional Housings; Installing Multiple Side-By-Side Receivers; Emergency Stop; Emergency Stop Engaged By The Transmitter - OMFB RADAR II Installation And User Manual

"RADAR II"
USER MANUAL 101-050

5.4 Insertion in additional housings

The receiver may be inserted in an additional housing as long as it is made of plastic
and not metal.
Plastic
Metal
Insertion in a metal housing must absolutely be agreed upon and assessed with OMFB
staff to avoid unpleasant malfunctions.

5.5 Installing multiple side-by-side receivers

In the RADAR II 2CH+2CH, 6 CH, 8 CH, 10 CH and 12 CH configurations, which involve
multiple receivers installed side by side, these must be installed at a minimum distance of
30 mm from one another.
6. E S
MERGENCY TOP

6.1 Emergency Stop engaged by the Transmitter

(Regarding the RADAR NEW TXF transmitter, see the corresponding manual)
The emergency stop command predominates over all other conditions, and thus may be
activated even if the key for another transmitter function is inserted due to a breakdown
or carelessness.
pag.41
O.M.F.B. S.p.A. Hydraulic Components
We reserve the right to make any changes without notice.
Edition 2003.06 No reproduction, however partial, is permitted.
Via Cave, 7/9 25050 Provaglio d'Iseo (Brescia) Italy Tel.: +39.030.9830611
Fax: +39.030.9839207-208 Internet:www.omfb.it e-mail:contatti@omfb.it