Table of Contents
Advertisement
In this manual, the OSD (On Screen Display) may be different from your TV's because it is just
example to help the TV operation.
PICTURE menu options
Press the MENU button on the front panel the remote control and then use
button to select the Video menu, press
PICTURE
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Select
Colour temperature
DNR
Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in
Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote
control.
Contrast
Adjust the contrast of the picture.
Brightness
Adjust the brightness of the picture.
Colour
Adjust the colour of the picture.
NOTE: This option is invalid in PC mode, and it will be shown in gray.
Tint
Adjust the tint of the picture(in NTSC mode).
Sharpness
Select sharpness mode of the picture.
Colour Temperature(in VGA mode)
Select an optimum color temperature mode to suit your eyes for viewing among Normal, Warm and Cold.
DNR
If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level
between Off, Low, Mid and High.
button to enter(see the picture below).
↓
1. Use ↑/↓ button to select what you want to
Personal
2. Press → / ← button to setup.
50
3. When you are satisfied with your adjustment, press
50
50
0
Normal
Adjust
Normal
Off
adjust in the Video menu.
MENU button.
→ / ←
10
Advertisement
Table of Contents
