Step 12 Installing The Wall-Mount Sensor - Niles Remote Control Anywhere Kit Operation Manual

INSTALLATION
CONTINUED
Step 12
Installing the Figure 19
Wall-Mount Sensor
Reattach the Sensor Cable
to the Wall-Mount Sensor's
removable connector
following the same
procedure as before.
(See Figure 18)
! Connect the wires as
before:
1 = Red
2 = Bare
3 = Black
Plug the Sensor Cable
connector into the back of
the Wall-Mount Sensor.
Screw the Wall-Mount
Sensor to the bracket using
the supplied screws, then
screw the Decora ® faceplate
into place using the supplied
faceplate screws.
(See Figure 19)
17