Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
Indicators of Operation:
(Operation of the Ozone & Power
Indicator lamp.)
Ozone button to be operated when
•
the room is unoccupied. Open the
door and window when you return to
the room after Ozone treatment.
Turn the unit on and check that the
•
small red/orange lamp is illuminated.
The lamp is located on the front
panel; one is silkscreen 'Power' and
the other is silkscreen 'OZONE'.
Troubleshooting – What to look for first:
1. I have plugged in the unit, turned the power switch to "On" and nothing is
happening. What's wrong?
Make sure the electrical outlet is capable of providing power to the unit.
•
Try plugging another 120v appliance into outlet to see if it works and
outlet is getting power.
Check the back cover where the electrical cord plugs into the unit.
•
With cord unplugged from wall outlet firmly push the cord where it
attaches to the air purifier to make sure it has a proper connection.
Typically, this is normally the problem. The cord is not fully
pushed in on the unit. Once you have fully pushed the cord all the
way in on the unit then plug it back to the wall outlet and retest.
Check to see if the proper fuse is installed and that it is serviceable.
•
Ensure that the fuse cap is completely seated and secured in its
•
receptacle. See Page 12 for more details.
Some models are equipped with an On/Off switch on the back of the
•
unit. Make sure this is switched to On.
2. The fan is operating but the unit won't produce any ozone. What's wrong?
In order for Ozone to work the user must first install the 2 Ozone plates
•
located in the small brown box. See page 5 and 6 for more
information.
Unplug cord from wall outlet and then check the Ozone plate(s) for
•
serviceability. If they are cracked or broken, the plate(s) will require
replacement.
15
Advertisement
Table of Contents
