New Comfort Commercial Air Purifier Model HMA-700/O3 Air Purification Unit User Guide “Knock out odors at their source” Please read all of the information provided in this user’s guide before operating your new air unit.
Page 2
CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN ATTENTION Caution: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVCE PERSONNEL. This “bolt of lightning” indicates that uninsulated material within your unit may cause an electrical shock.
FOR YOUR RECORDS Please record the model and serial number below, for easy refer- ence, in case of loss or theft. These numbers are located on the back panel of your air purification unit. Space is also provided for other relevant information.
Operating the Commercial Purifier (Front View) Timer Control Turn clockwise to set the timer for timed operation up to one hour. Turn Knob counter-clockwise to Hold position for continuous use. Indicator Light Illuminates when unit is in operation. UV light can kill bacteria, mold, germ, etc. 5 UV light Watt 5000 hour rated bulb.
(Back View) Plate Receiver Insertion of ceramic plates. Slots Houses removable fuse. (Spare fuse Fuse Holder included, 1 amp, 1.25 inch) 110 Volt grounded cord (unless otherwise specified). DO NOT bypass ground. Power Cord...
Page 6
The New Comfort 700/O3 Commercial Purifier is designed to remove odors and sanitize the air in unoccupied spaces by using Ozone and UV light. The unit has a timer that will enable it to run unattended. The timer will run the unit for up to an hour and then shut the Industrial Cleaner off.
Page 7
In order to treat a specified area, the air in that area does not need to pass through the unit as with air filtration devices. Instead, the unit generates ozone internally which circulates throughout the room to attack odor at their source. It will control odors from sources such as: ...
Page 8
There is an override that can make the unit run indefinitely. To run the unit for a longer period of time, turn the control knob counterclockwise to the “Hold” position. This New Comfort Industrial Cleaner is designed to operate in unoccupied areas only!
Page 9
New Comfort Service Center. If UV light does not work, please contact your New Comfort Authorized dealer for service repairs. Do not disassemble unit. Caution: No attempt should be made to remove the top panel of the unit, as there are no user serviceable parts.
Need help?
Do you have a question about the HMA-700/O3 and is the answer not in the manual?
Questions and answers