Replacing The Fuse; Troubleshooting - New Comfort CA3500 Instruction Manual

REPLACING THE FUSE

A fuse holder is located on the back of the unit next to the power cord.
To replace or check the fuse:

Remove the fuse holder by pressing on the clip and pulling straight out.
If the fuse is blown:

Replace with the standard replacement fuse. Insert the new fuse into the
fuse holder. Press the assembly straight in until it latches.
120 volt models: Fusing current no more than 1.0 Amp.
If the fuse holder cap is not installed correctly,
TROUBLESHOOTING GUIDE
Indicators of Operation:
(Operation of the Ozone & Power Indicator
lamp.)

Ozone switch to be operated when the
room is unoccupied. Open the door and
window when you return to the room if
Ozone operated for several hours.

Turn the unit on and check that the small red/orange lamp is illuminated.
The lamp is located on the front panel; one is silkscreen 'power' and the
other is silkscreen 'ozone'.
Troubleshooting – What to look for first:
1. I have plugged in the unit, turned the power switch to "On" and nothing is
happening. What's wrong?
9
CAUTION!
the unit will not operate.