ElectroSteam IND00105 Use And Maintenance Manual page 41

TANK CLEANING
If the machine is not used for
long periods of time, be sure
not to leave water in the tank
to avoid the formation of al-
gae and calcareous deposits.
To remove the tanks for an easy
cleaning, remove the securing
casing placed on them by loo-
sening the two fi xing screws.
(Fig. 28)
Disconnect feeler cable.
Remove the tanks and clean
them. Pay attention to the suc-
tion tubes that cannot be com-
pletely separated from the rele-
vant tanks.
At the end of the cleaning ope-
ration, re-install the tanks and
fi x the securing casing with the
screws again making sure not to
press the suction tubes.
English
Fig. 29
40
Fig. 28