Hach GANIMEDE P User Manual page 41

4.2.1 Menu structure
Data
Current
Express as
Unit
Dilution
Factor
Sampling
Note
Display
Data/display
Output
PC
Printers
LIMS
After a connection to the analysis unit has been established, a list of current
measurement results is shown.
In addition to the mean value, both single results and single absorbances are
displayed for a double determination. Measurement results that are beyond the
selected measurement range are shown in red.
Note: A new measurement can be started only if the results of the previous
measurement are transferred completely to the open-loop control unit and the
indicator display of the analysis unit is no longer flashing.
The sample name can be changed.
The unit mg/L, g/L, µg/L, mmol/L, mg/100 g or Ext. can be changed.
If the dilution factor is changed, the result is calculated again automatically.
If the sample-specific factor is changed, the result is calculated again automatically.
The date and time of the sampling can be changed
The comment on the sample, a maximum of 30 characters long, can be changed
Display of all saved measurement results for the individual sample batches.
Selection list of all saved sample batches. Select the desired sample batch.
Output of the saved measurement results of the different sample batches to the PC,
printer or a LIMS system.
Transfer of the measurement results to the PC via the RS 232 interface of the
open-loop control unit.
Transfer of the measurement results to the analysis unit by means of the IR interface
and then on to the printer via the RS 232 interface of the analysis unit.
Transfer of the measurement results to the analysis unit by means of the IR interface
and then on to the LIMS system via the RS 232 interface of the analysis unit.
Operation
41