Table of Contents
Advertisement
Connect One
1.
Introduction
This manual is intended to familiarize customers with Connect One's Instant Internet
Evaluation Board II-EVB-363. The II-EVB-363 is an evaluation platform for the
Nano WiReach™ WiFi Module, Nano LANReach™, Nano Socket iWiFi™ and Nano
SocketLAN™. The Connect One Nano and Socket modules are secure serial-to-WiFi
/ serial-to-LAN modules that also act as a bridge to connect serial devices to Ethernet
or 802.11b/g wireless LANs. The modules fit into a compact form factor and utilize
Connect One's iChip CO2144 IP Communication Controller
command set, a powerful set of Internet protocol commands developed by
Connect One to manage Internet connectivity through an Ethernet or wireless LAN
connection.
The modules enable sending and receiving textual and binary data, MIME-encoded
email messages; downloading HTML pages or files from a Web server, or items from
within a page; Web serving, as well as managing TCP or UDP socket
communications (with or without SSL3) over the Internet. They also include an FTP
client and a TELNET client.
Nano WiReach/Socket iWiFi can easily connect existing LAN based solutions to a
WiFi network when used in bridging mode.
Nano WiReach/Socket iWiFi support numerous WiFi security protocols such as
64/128-bit WEP encryption, AES-CCM and TKIP encryption, WPA (including AES)
and WPA2 in both PSK and Enterprise modes. The modules also support the
SSL3/TLS1 security protocols.
2.
Unpacking
Take the II-EVB-363 out of its box. Included in the box are:
• The II-EVB-363 motherboard including
o 363MW: Nano WiReach module
o 363ML: Nano LANReach module
o 363MD: Both Nano modules
o 363MS: Nano SocketLAN module
o 363MO: Nano Socket iWiFi module
• A serial cable with two DB-9 connectors
• A USB cable
• Antenna (in 363MW and 363MD)
• +9VDC Power supply adaptor (110/220 VAC)
• A single 30-pin female receptacle connector for prototyping on your own PCB
3.
Connections
1. Communications Cable:
• Serial RS232: Connect one end of the RS232 cable to the D-shell, 9-
pin female, Host RS232 port on the II-EVB-363 (J4) and connect the
other DB-9 connector to the COM1 or COM2 serial port on your PC,
or to the serial port of your embedded device.
II-EVB-363NW User's Manual
™
™
and the AT+i
4
Advertisement
Table of Contents
