Table of Contents
Advertisement
Connect One
Appendix 4: Installing USB Drivers on a PC
Installing the USB driver:
The USB driver is supplied in three separate files: sabalo.inf, iChip.inf and usbser.sys.
These files may be obtained on the Connect One Web site under:
Support >> Drivers & Utilities at: http://www.connectone.com/support.asp?did=30.
1. Copy "sabalo.inf" and "iChip.inf" to the directory C:\WINDOWS\inf. To view the \inf
directory, you must allow viewing of hidden folders in Folder Options.
2. Copy usbser4.sys to C:\WINDOWS\system32\drivers.
3. Connect one end of a USB cable to your PC. Connect the other end to the USB
module
"device" connector of the II-EVB-363 board on which the
is mounted.
4. Turn on the power to the EVB board.
5. The "Found New Hardware Wizard" of Windows XP pops up and prompts you to
install a new device driver. When prompted with the message "Can Windows connect
to Windows Update to search for software?" Select No, not this time. See Figure 1.
Figure 1
II-EVB-363NW User's Manual
15
Advertisement
Table of Contents
