Table of Contents
Advertisement
Chapter 2
Be sure to disconnect the power cable from the power source before performing
any work on your mainboard, i. e. installing a CPU, memory module, changing
a jumper setting, etc. Not doing so may result in electrical shock!
2-1 Installing a CPU in a Socket 370
Installing a heat sink with cooling fan is necessary for proper heat dissipation
from your CPU. Failing to install these items may result in overheating and
possible burn-out of your CPU.
2-2 Setting Your CPU's Parameter
Frequency Configuration
Frequency.
* CPU Speed = Frequency ratio x System Frequency
You do not need to make voltage settings because SeePU automatically sets
your CPU voltage.
6
Chapter 2
Hardware Setup
.
JP2A/JP2B
CPU Bus
Advertisement
Table of Contents
