Step 9 Fixing And Insulating The Connection Part For Refrigerant Pipes; Step 10 Installing And Connecting The Drain Hose - Samsung AC TNPPEH Series User & Installation Manual

Step 9 Fixing and insulating the
connection part for refrigerant pipes
CAUTION
• Before wrapping the connection part for refrigerant
pipes, be sure to check whether there is gas leakage
on the connection part.
1 Wrap the foam insulation around the connection
part as shown in the figure. This wrapping minimises
condensation.
High
pressure pressure
pipe
Pipe insulation
Insulator for pipe
30 mm or more
connection part
NOTE
• Use polyethylene foam over 5 mm thick to insulate the
connection.
DB68-09343A-00_IBIM_PAC 미라지 이집트파키스탄_IQ_EN.indd 39
Low
pipe
2 Fasten the pipes with a pipe clamp and fix it with screws.
WARNING
• Remove the middle part of the pipe outlet protection
rubber before inserting the pipe.
Pipe outlet
protection rubber
Step 10 Installing and connecting the
drain hose
1 Wrap the drain hose with the provided insulation. This
wrapping minimises condensation.
Drain hose
Insulation
39
English
2020-07-28 오전 11:08:51