Step 14 Fixing And Insulating The Connection Part For Refrigerant Pipes; Step 15 Installing And Connecting The Drain Hose - Samsung AC BNPDKH Series Installation Manual

Step 14 Fixing and insulating the
connection part for refrigerant pipes
CAUTION
• Before wrapping the connection part for refrigerant
pipes, be sure to check whether there is gas leakage on
the connection part.
1 Wrap the foam insulation around the connection
part as shown in the figure. This wrapping minimises
condensation.
High pressure Low pressure
pipe pipe
Pipe insulation
Insulator for pipe
30 mm or more
connection part
NOTE
• Use polyethylene foam over 5 mm thick to insulate the
connection.
2 Fasten the pipes with a pipe clamp and fix it with screws.
WARNING
• Remove the middle part of the pipe outlet protection
rubber before inserting the pipe.
Pipe outlet
protection rubber
Step 15 Installing and connecting the
drain hose
1 Wrap the drain hose with the provided insulation. This
wrapping minimises condensation.
Drain hose
Insulation
English 21