Clean Function - Samsung AC TNPPEH Series User & Installation Manual

DB68-09343A-00_IBIM_PAC 미라지 이집트파키스탄_IQ_EN.indd 25

Clean function

Use the Clean function to remove moisture from the inside of the
air conditioner for preventing propagation of fungi, bacteria, etc.
▶
• When the Clean function is set, the
on the indoor unit display. When the air conditioner is ended, the
Clean function starts for 10 minutes and then the air conditioner
turns off.
• When the Clean runs with the air conditioner off, cleaning runs
for 10 minutes and then the air conditioner turns off.
• Once the Clean function is started, it automatically continues to
operate until it is cancelled.
NOTE
• When you reactivate the Clean fuction while Clean function is
running, the cleaning stops immediately.
• The Clean function operates only in Auto (Cool), Cool and Dry modes.
• Although the Clean appears on the remote control in Auto (Heat),
Fan and Heat modes, the Clean function does not operate.
• Clean function runs only when the air conditioner operates for
over 20 seconds in Auto (Heat), Cool and Dry modes.
• Although the Clean appears on the remote control with the
Timed off active, the cleaning does not operate.
• The (Clean) indicator does not disappear on the indoor unit
display when you turn off the air conditioner with the Clean
function active. This is a normal operation.
• While in Clean function, the other indicators other than
(Clean) disappear on the indoor unit display. This is a normal
operation.
• When the Clean function runs, it starts with a low fan speed and
after a certain period of time, the fan speed becomes strong.
▶ Select Clean. ▶
(Clean) indicator appears
25
English
2020-07-28 오전 11:08:47