Page 6
EN 50581: 2012 ________________________________________ CE-Dichiarazione di conformità. Dichiariamo sotto la nostra esclusiva responsabilità che il pre- Festool GmbH sente prodotto e conforme alle norme e ai docu- Wertstr. 20, D-73240 Wendlingen menti normativi seguenti: GERMANY EG-conformiteitsverklaring. Wij verklaren op...
Festool electric power tools must only be – installed on work tables provided by Do not dispose of it with domestic Festool for this purpose. If the tool is in waste. stalled in another, or self-made, work ta ble, it can become unstable and result in Handling instruction serious accidents.
Emission levels terials similar to wood. With the special saw The levels determined in accordance blades offered by Festool, these machines can with EN 62841 are typically: also be used for sawing plastic, steel, alumini um, non-ferrous metal and ceramic plates.
CAUTION specifications on the name plate. Risk of injury from hot and sharp insertion ► In North America, only Festool machines tool with the voltage specifications 120 V/60 Hz may be used. ► Do not use any blunt or faulty insertion tools.
Page 10
English ► Close the clamping lever. ► Remove the chip guard and the splinter guard. Adjusting the saw blade guidance ► Open the clamping screw [4-1] with the al To be better able to guide the saw blade, pen len key . dulum jigsaws have an additional carbide ►...
► and plunge the saw into the workpiece at The order numbers of the accessories and tools the maximum stroke rate and in pendulum can be found in the Festool catalogue or on the stroke setting 3, see fig. [6]. Internet at "www.festool.com".
See the CMS brochure for more information. 10.5 Saw blades, other accessories In order to saw different materials quickly and cleanly, Festool offers saw blades for all appli cations that are specially designed for your Festool jigsaw. 11 Environment Do not dispose of the device in the household waste! Recycle devices, ac...
Need help?
Do you have a question about the Trion PS 300 EQ and is the answer not in the manual?
Questions and answers