Arjo Auralis Quick Reference Manual

QUICK REFERENCE GUIDE - CONTROLS
Auralis
Run/Standby button
Run mode – press the button once. The
indicator changes from flashing to constant.
Standby mode – press the button for two
seconds. The indicator changes from constant to
flashing.
Wait indicator
Shown when the mattress or seat cushion is
being inflated. Remains on 15 minutes until the
mattress or seat cushion is fully inflated.
Autofirm mode button
Press and hold 2 seconds for Autofirm mode.
Mattress inflates to a temporary firm surface.
Autofirm mode lasts for 15 minutes but may be
increased in 5 minute steps to a maximum of
30 minutes. Indicator turned on when active.
Not for seat cushion.
Alternating mode button
Press for Alternating mode (default). The
Alternating mode inflates or deflates different
cells to create a fluctuating surface. Indicator
turned on when active.
Front panel
alarm
indicators
08.AI.01EN_03 • 09/2022 • Page 1/2
Reactive CLP (Constant Low Pressure)
mode button
Press for Reactive CLP mode. Maintains
constant lower pressure in all the cells. Indicator
turned on when active.
Not for seat cushion.
Risk of injury or discomfort
ALWAYS set the comfort level at maximum
for patients weighing over 360 kg (793 lb).
(Auralis Plus only)
Comfort control buttons
Press to adjust the pressure in the support
surface to set the comfort level. The indicators
show the comfort setting.
Mute alarm button
Press to silence the audible alarm for
15 minutes, the indicator is turned on.
The alarm is cancelled when the alarm condition
has been corrected.