EINHELL FREELEXO CAM Original Operating Instructions page 59

Guide cable LED
(56)
Lit green
Flashing yellow
Flashing red
Lit red
Off
Anl_FREELEXO_CAM_SPK13.indb 59 Anl_FREELEXO_CAM_SPK13.indb 59
GB
Description / possible cause
The robot lawn mower is situa-
ted in the charging station (19)
or near the search loop and the
deviation from the reference
quality value is small.
The robot lawn mower is situa-
ted in the charging station (19)
or within the search loop and
the deviation from the reference
quality value has worsened.
The robot lawn mower is situa-
ted in the charging station (19)
or inside the search loop and
the deviation from the reference
quality value is too big. The
robot lawn mower stays in the
charging station (19).
Camera fault:
The robot lawn mower does
not receive a signal from the
camera unit.
- The guide cable (24) has
been damaged.
- The power supply to the
charging station (19) has
been interrupted.
- The robot lawn mower is situ-
ated outside the search loop.
- 59 -
Solution
- The robot lawn mower is ready
The robot lawn mower is ready. If necessary
check the boundaries of the mowing area as
they might become worse. The robot lawn
mower is then unable to continue working
Check the boundaries of the mowing area.
Then delete the reference value and carry
out a new initialization of the boundary qua-
lity value.
Switch off the main switch (7) (OFF) and
then switch it back on (ON) again to restart
the robot lawn mower.
Check whether the LED display (19a) on the
charging station (19) is lit green.
- Make sure that the guide cable (24) is laid
correctly and centrally underneath the
charging station (19).
- Check the position of the charging station
(19).
01.12.2022 15:35:25 01.12.2022 15:35:25