Hytek ALPHA/50WAFC Technical Data Manual page 8

THE ALPHA PUMP TERMINAL IN STANDBY MODE
This is when the Alpha Pump Terminal is powered up, with the display
illuminated, but not in use.
DISPLAY INFORMATION:
Total Pump 1: This is the number shown in the top left-hand corner of the
display screen. It is the total amount of fuel dispensed by
pump 1 since installation.
Time and Date: This is shown in the centre at the top of the display screen
It will cycle between the Time & Date and the site name.
Total Pump 2: This is only active if an additional pump is connected to the
ALPHA FC10. NOT AVAILBLE ON MID VERSION.
Last These are shown in the dark coloured box in the centre
Transaction: of the display screen. They include the Data Tag ID
number of the last user, the amount of fuel delivered, the
time and date the fuel was delivered and vehicle MPG.
Last Amount This is shown in large text at the bottom of the display.
Dispensed:
S886/3