Important Warning Notes - Hytek ALPHA/50WAFC Technical Data Manual

Alpha ex & mir approved diesel pump with fuel control system
Table of Contents

Advertisement

IMPORTANT WARNING NOTES

1. On above ground storage tanks, an angle check valve fitted with the
appropriate spring or pressure regulating valve must be fitted at the
tank outlet to prevent loss of fuel under gravity in the event of
vandalism or accidental damage.
2. This pump must only be used to dispense diesel or other liquids
classed as category 3 in accordance with European Regulation No.
1272/2008. It must not be used to dispense petrol or any other liquid
with a similar flash point.
3. Installation of this equipment and its associated tank, pipe work and
fittings should only be carried out by qualified fuel installation
engineers.
4. The installation must be carried out in accordance with the
requirements of EN 60079-14 and the latest relevant electrical and
local authority regulations and standards.
5. It must not be used with other liquids or for other applications. We will
accept no warranty claims or liability if it is used for other liquids or
applications.
6. Minimum delivery is 2 litres. See that indication is ZERO before delivery
commences. For attended service a delivery can only be authorised
after settlement of the previous transaction.
The pump must be located and installed in a climatic environment in
7.
accordance with the following:
Temperature
Humidity
Environment
Mechanical
Electrical Disturbance :
:
-20°C to +45°C
:
Class H3 (open location with
average climatic conditions)
:
Open and condensing
:
Class M1 (location with vibration of
low significance)
E1 (located in residential, commercial
and light industrial environments)
S886/3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALPHA/50WAFC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Alpha/70wafcAlpha/90wafc

Table of Contents