Advertisement
1. Marks "X" onto magnets
First, place all magnets together as a stack. Use marker to mark "X" on the top of
magnet until all 15 magnets are marked. This step can make sure all magnets will
be placed in NSNSNSNSNSNS magnetic pattern in step 2.
Remark: 3 extra magnets are for your spare parts only in case your magnet is
broken by accident!!!
2. Place magnets inside the bell
Place 12pcs magnets inside the motor bell as the magnetic pattern shown below.
Use a small clip to adjust the distance between magnets and magnets. They
should be placed at same distance and at the edge of bell. Then, use a drop of CA
to secure the position of magnets.
Bell inside
X
Komodo Hobby
www.komodohobby.com
X
X
Magnets should be placed at
same distance and at the edge
of bell.
360
X
X
o
X
2
Advertisement
