Advertisement
Quick Links
Advertisement
Related Manuals for komodo KDINSUPS11A
Summary of Contents for komodo KDINSUPS11A
- Page 1 INFLATABLE STAND UP PADDLE (BOARD 11' + ACCESSORIES) KDINSUPS11A...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS This user guide has been compiled to help you safely operate your inflatable Stand Up Paddle Board (Hereinafter referred to as ISUP). Read it carefully and familiarize yourself with the ISUP before using it. Retain this guide for future reference. •... - Page 4 FOR YOUR SAFETY No protection against drowning Design working pressure Swimmers only Attention/danger No protection /warming against drowning Always supervise children in water Swimmers only Mandatory Instruction Do not use in white water Do not use in braking waves Do not use in offshore current Do not use in offshore wind Not for children 14 years of age and below...
- Page 5 COMPONENTS • Stand-up Paddle Board • Repair kit • 3-shafted adjustable paddle • Carry bag • Hand pump w/pressure gauge • Middle FIN • Valve Wrench • User Guide OVERVIEW Drop Stitch EVA foot pad High pressure recessed valve for quick and easy inflation and deflation Front D-ring for securing cargo...
- Page 6 ASSEMBLY Unfold the board from the packaging Choose a flat, clean surface to unfold board. Roll out the SUP board until it is lying flat with top side facing up. Valve operation Follow the instructions below for valve operation and correct inflation and deflation procedures.
- Page 7 Inflation Unscrew the valve cap, ensure the valve pin to open the valve, Let the air flow naturally into the product. Press the valve pin so it in the “UP” position. Ensure the pump hose is connected to the “inflate” outlet on the pump. Connect the pump nozzle into the valve, with a half twist (clockwise) Open the tap on the pump and start pumping...
- Page 8 Fin installation The two side fins are permanently attached to the product. Once the board is inflated, slide in the middle fin onto the base and insert the pin to lock it into position. Inflation tips and precautions • DO NOT use an air compressor to inflate the board. Over inflation can cause damage to your board.
- Page 9 Adjustable Paddle • The paddle comes in three pieces. To assemble the paddle, hold the button in while sliding the pieces together until they click into place. The top section of the paddle is adjustable. • To find the ideal height for your paddle, start by building the paddle so it is 6 inches taller than your own height.
-
Page 10: Cleaning And Care
CLEANING & CARE • Before storing, hose off the board and let it dry completely to prevent mildew build-up. • Do not use harsh chemicals for cleaning. Most dirt can be removed with a mild soap and water. • You may store the board inflated or deflated. If you deflate the board, we recommend that you store it in the protective bag that came with the board. -
Page 11: Troubleshooting
TROUBLESHOOTING Leak Detection • If the board is losing air pressure, not caused by colder temperatures, check the board for leaks, starting with the valves. • A leaking valve is rare, to locate a leak, we recommend mixing soap and water in a spray bottle, spray around the valve. - Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the KDINSUPS11A and is the answer not in the manual?
Questions and answers