Advertisement
Congratulations on your purchase of KH-278 Outrunner Motor Standard Kit or KH-
278 Outrunner Advance Kit. This outrunner motor kit includes all parts that you need
to build a powerful motor for your RC plane. In this kit, most of main parts, bell, shaft
holder, main shaft and sleeve, are manufactured by high-end CNC machine. We
would say that it is a state of art outrunner motor kit that hard to find in RC world
today.
Radio Control Model and Outrunner Motor Kit are not toy!!! It contains sophisticated
small parts and is designed for hobby use only. All parts of this outrunner motor kit
have to be assembled and operated with great care. Outrunner motor can produce
very high power to turn gear or spindle propeller. It is capable of causing property
damage and all bodily harm to operator or spectators. If you are a beginner of motor
builder, please seek assemble and operational help from experienced motor builder.
If this outrunner motor kit is not assembled and operated properly, it can destroy your
electronic speed control, receiver, batteries and relevant equipment completely.
(QTY)
Items
(1)
Bell
(1)
23.8mm Stator
(1)
Shaft Holder
(1)
3mm Threaded Steel Shaft
(15)
NdFeB Magnets
(1)
AWG 24, 30ft. Enameled Magnet Wire
(1)
1.9mm C-Clip
(7)
Yellow, Red, Blue and Black Shrinking Tubes
(3)
M3 Washers
Additional Parts include in Standard Kit:-
(2)
KH-278 Copper Sleeves
Additional Parts include in Advance Kit:-
(2)
Ball Bearings 3 x 6mm
(3)
2.4mm Connectors (Male)
(3)
2.4mm Connectors (Female)
Komodo Hobby
www.komodohobby.com
Introduction
Warning
Be caution!!!
Parts List
1
Advertisement
