EMC Iomega StorCenter ix2-dl User Manual page 93

6. Uncheck Read to remove all access to a Share and remove the Share from the table. If iSCSI is
enabled, uncheck Read to remove all access to an iSCSI drive and remove the iSCSI drive from
the table.
7. Click Apply to save your changes.
8. If NFS is enabled, the GID field is visible. The GID value must be the same on both the Linux
client and the StorCenter ix2-dl for the client to access files. To modify the GID, type a new
GID value.
Setting Quotas
Quota settings to enable quotas and set a default quota. Quotas are only set for
1. Click
individual users, and not groups.
2. In the Quota Settings dialog, click Enable quotas to turn on quotas for each user. Quotas can
be set for each user individually or set as a default value.
3. Enter a Default Quota in gigabytes. When you set a default quota, this becomes the quota size
for all new users.
4. Check Set default quota for all users to globally set the same quota size to all users. You may
overwrite this default value for individual users by setting their quota size separately in the
user's Information section.
5. Click Apply to save your changes.
Securing Your Device and Contents
83