Bluetooth File Sharing - EMC Iomega StorCenter ix2-dl User Manual

Bluetooth File Sharing

Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on
the StorCenter ix2-dl from a Bluetooth device.
Configuring Bluetooth settings
1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth
users to supply a unique PIN that they have defined before allowing them to transfer files to
the destination Share on the StorCenter ix2-dl . If you have
unique PIN number, which will be supplied by devices attempting to upload data using
Bluetooth.
3. To set the destination Share, click
4. Click Apply to save your settings.
Note: To change any Bluetooth settings, click
enabled
.
.
Sharing Files
security, you must define a
25