EMC Iomega StorCenter ix2-dl User Manual page 139

The video camera is connected to the network and a recording schedule is set for it, but it is not
currently recording.
The video camera is connected to the network, but no recording schedule is set.
Space
The Space column identifies how much disk space is currently used by the video files in the
destination folder for this video camera.
Model
This column lists the model information for this video camera.
Action
For each video camera, you can perform the following actions:
•
Click either
available only for video cameras that are currently connected and accessible on the network.
Use the manual start and stop record buttons to start recording at any point and to stop a
recording until the next scheduled start time.
• Note: During recording, if you want to change the camera resolution and frame rate, you
must stop recording, change the values on the camera's configuration page, and then start
the recording again.
•
Click to open a live view from your video camera. You may be prompted to supply the
username and password for the video camera.
How do I...
add a video camera
manage a video camera
delete a video camera
to manually start recording or to stop recording. These buttons are
Media Management
129