Hager EG072 - Timetable Switch Manual

Function

The EG072 is a timetable switch that enables you to automatically pilot an apparatus or electric circuit from your board.

It is equipped with ten pre-recorded programmes (P0 to P9), on some of which (P2 to P9) time schedules may be modified according to your needs, by choosing start and stop times.

Presentation

On the screen

1. Present time.
2. State of circuit (ON or OFF).
3. Current programme.
4. Days to which programme applies
   1 = Monday, 2 = Tuesday, etc. up to 7 = Sunday).

The buttons

5. Choice of programme.
6. Scrolling of programming times.
7. Reset: to set the time switch to zero.
8. Less and more: setting the time and modification of programming times.

Setting the time and date

e.g.: 8.59-day 4 (Thursday)

With - or + scroll through the 24 hours of the successive days until you reach the desired day and time.

Available Programmes

Groups of days: 1-2-3-4-5-6-7

Time Switch

P	Days	Programmes
P0	1 → 7	OFF cannot be modified
P1	1 → 7	ON cannot be modified
P2	1 → 7
P3	1 → 7
P4	1 → 7
P5	1 → 5
	6 - 7	OFF
P6	1 → 6
	7	OFF
P7	1-2-4-5
	3 - 6
	7	OFF
P8	1 → 5
	6 - 7
P9	1 → 5
	6 - 7

To select a programme

1. Press P several times until the desired programme (P0 to P9) is displayed – e.g.: P2
   
2. Press to see the programme displayed.
   
3. Validate by pressing P

To modify a programme

1. Press P several times until the desired programme (P0 to P9) is displayed – e.g. P3
   
2. Press to see the programme displayed.
   
3. If necessary, modify the switch-on times using the + or –buttons.
   
   A modified programme step is marked by the symbol . Carry out operations 2 and 3 again to modify other times in the programme. Carry out operations 2 and 3 again to modify other times in the programme.
4. Validate by pressing P .
   The present time and day are displayed, together with the symbol ,marking the modification in the programme.
   

Return to pre-recorded programme

Press P: Display first step of programme.

Press for 4 seconds.

The symbol disappears; the time switch has returned to the pre-recorded programme.

Electrical connections

Technical specifications

Technical specifications

• Supply: 230V~ +10%/-15% 50Hz/60Hz
• Power consumption = 1 VA
• Output: 1 changeover contact
• Cut-off power
  • Reductive load µ 16A / 230 V~ AC1
  • Inductive load µ 3A / 230 V~ cos φ = 0,6
• Protection degree: IP20
• Type of insulation: II
• Maximum operating height: 2000m
• Rated impulse voltage: 4 kV
• Upstream circuit breaker: 16 A
• Voltage and current declared for the needs of EMC emissions tests: 230 Vv / 0,5 A

Independent panel-mounted (DIN rail) control device

Functional characteristics

• Time precision: ±1min per day at 20°C
• Working reserve by lithium battery: 3 years' accumulation for current breaking
• Action type: 1B
• Pollution category: 2
• Software structure: class A

Environment

• Operating temperature: -10 to +50°C
• Storage temperature: -10 to +60°C
• Hygrometry: 90% at 20°C
• Size: 1 (17.5 mm)

Connection by screw terminal

• Max. conductor section: 4 mm²
• Min. conductor section: 1 mm²

Correct Disposal of This product (Waste Electrical & Electronic Equipment).
(Applicable in the European Union and other European countries with separate collection systems).

This marking shown on the product or its literature indicates that it should not be disposed with other household wasted at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes of disposal.

Usable in all Europe and in Switzerland

This device must be installed only by a qualified electrician according to the installation standards in force in the country.

Warranty

NOT APPLICABLE FOR AUSTRALIA

A warranty period of 24 months is offered on hager products, from date of manufacture, relating to any material of manufacturing defect. If any product is found to be defective it must be returned via the installer and supplier (wholesaler). The warranty is withdrawn if:

• after inspection by hager quality control dept the device is found to have been installed in a manner which is contrary to IEE wiring regulations and accepted practice within the industry at the time of installation.
• The procedure for the return of goods has not been followed. Explanation of defect must be included when returning goods.