Netopia 3341-ENT Firmware User Manual page 71

The Pre Shared Key field becomes visible to allow you to enter a Pre Shared Key. The key can be between
8 and 63 characters, but for best security it should be at least 20 characters. Clients wishing to connect
must also be configured to use WPA with this same key.
Enable Wireless:
SSID:
Block Wireless Bridging:
Channel...
AutoChannel...
Closed System...
Enable Privacy...
Pre Shared Key:
Wireless Multiple SSID Setup...
MAC Address Authentication...
Select an 8 to 63 character passphrase. At least 20 is ideal for best security.
• WPA - 802.1x: If you select WPA - 802.1x you can then configure a RADIUS server to authenticate users of
the wireless network. To do this, you must return to the Security menu, Advanced Security Options to
specify the RADIUS server you want to use. See
Configuration" on page
Enable Wireless:
SSID:
Block Wireless Bridging:
Channel...
AutoChannel...
Closed System...
Enable Privacy...
Configure a RADIUS server in the Security menu, under
Advanced Security Options, to authenticate using 802.1x.
If the SSID is part of a VLAN, it will use the VLAN's
configured RADIUS server in the Authentication Profile instead.
Wireless Multiple SSID Setup...
MAC Address Authentication...
Wireless LAN Configuration
3-11.
Wireless LAN Configuration
Yes
0271 1000
No
6
Off
Open
WPA - PSK (Pre-Shared Key)
"Advanced Security Options" on page 10-6
Yes
0271 1000
No
6
Off
Open
WPA - 802.1x
System Configuration 3-27
and "VLAN