4-18 Firmware User Guide
•
Choose the protocol from the pop-up menu: TCP and UDP, TCP only, or UDP only.
External Service...
Server Private IP Address:
Public IP Address:
Protocol...
Internal Port Start:
ADD NAT SERVER
•
Enter the Internal Port Start, if different from and not already preselected from the External Service type
list.
•
Select ADD NAT SERVER and press Return. The server will be added to your server list and you will be
returned to the Add NAT Server List screen.
Note:
In order to use CUSeeMe through the Netopia Router, you must export the ports 7648 and 7649. In
MultiNat, you may use a port range export. Without the export, CUSeeMe will fail to work. This is true unless a
static mapping is in place for the host using CUSeeMe. In that case no server list entry is necessary.
Modifying server lists
Once a server list exists, you can select it for modification or deletion.
•
Select Show/Change Server List from the Network Address Translation screen.
•
Select the Server List Name you want to modify from the pop-up menu and press Return.
Add NAT Server ("my_servers")
192.168.1.45
+-------------+
+-------------+
| TCP and UDP |
| TCP
| UDP
+-------------+
CANCEL
|
|