Table of Contents
Advertisement
Water supply mode / Water hardness
Setting maintenance parameters
EN
Rinsing
The parameters for rinsing are set as follows:
Parameter
Pre-rinsing
Brew unit auto rinsing
Mixer auto rinsing
Milk frother auto rinsing
48 / 78
Operation and Maintenance Instructions
Mains water connection and barrelled
water (tank) available.
Select the appropriate water supply mode.
The standard setting is supply from the
water tank.
Use of the tank function requires activation
in the accessory settings.
Water hardness
This is where you set the degree of water
hardness for the appliance.
Standard setting: 15° dH.
Setting values
30 minutes 1–4 hours
OFF 5–20 min.
OFF 5–20 min.
OFF 5–20 min.
Remarks
Default setting: 30 min.
Default setting: OFF
Default setting: 20 min.
Default setting: 20 min.
190086
Advertisement
Table of Contents
