Table of Contents
Advertisement
Installation Instructions
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
Mind the sufficient clearance from the walls and other flammable objects or
objects that are prone to discolouration. This clearance must be at least 5 cm
from the back and both sides, and 15 cm from the top. Note the fire safety
provisions at the place of installation.
•
The appliance should be installed only in a room, in which ambient temperature
falls in the range of 5–35°C.
•
When in operation, the appliance may not be installed in a cabinet.
Unpacking and Installing the Coffee Bean Container and Coffee Container
1. Unpack the coffee bean container and the topping container.
2. Before first use, clean them observing instructions in section 'Cleaning and
Maintenance'.
3. Fit the containers into the machine.
Observe instructions in sections 'Emptying the Coffee Bean Container' (points
1, 2, 3, 6, 7) and 'Emptying the Topping Container' (points 1, 2, 3, 6, 7).
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Do not use the appliance with an external timer or remote control.
190086
EN
19 / 78
Advertisement
Table of Contents
