Kalorik HLVI S1 Manual page 18

CLEANING THE FLOOR BRUSH
Unlock the latch on the underside of brush head, then remove the side
cover and take out the roller brush to clean. Use the cleaning brush &
blade tool to remove or cut any debris on the brush.
NOTE: If necessary, you can remove the side cover of the roller brush to
remove any stubborn debris.
CLEANING THE STRAINER AND MAINTAINING THE FILTER
Hold the main body, then press the button on top to detach the dustbin
cover. Rotate the top dust bin cover to open by following the lock and
unlock silkscreen for reference, then remove the stainless steel strainer and
HEPA filter.
The arrows on the top of the dust bin show how to disassemble and
reassemble as shown below.
www.KALORIK.com
Stainless steel
strainer
18
HEPA filter
220131