Kalorik HLVI S1 Manual page 11

INDICATOR LIGHTS
• Ion Indicator
o
o
• UVC Indicator
o
o
• HEPA Indicator
o
UVC/ION control button
When you power on your HUVI, the UVC light inside the dust bin and the air
ionizer are on by default. Use the UVC/ION button to adjust:
• Press 1 time to disable the ionizer while leaving the UVC light enabled.
• Press 2 times to enable the ionizer while disabling the UVC light.
• Press 3 times to disable both the UVC light and ionizer.
• Press 4 times to reenable both UVC and ionizer again.
Note:
When the power switch is off, the UVC light will continuously work
‒
10 minutes before turning off automatically.
Pressing the UVC/ION control button can control UVC function
‒
individually as long as there is sufficient battery power, even when
main power switch is off or the vacuum is charging.
www.KALORIK.com
ION
UVC
HEPA
Lights up when the ion function is on.
Turns off when ion function is off.
Lights up when the UVC function is on.
Turns off when UVC function is off.
Flashes as a reminder to empty the dust bin and to clean
the filters.
11
220131