NETGEAR WAG311 Installation Manual page 71

Installation Guide for the NETGEAR Dual Band Wireless PCI Adapter WAG311
Verifying TCP/IP Properties for Windows XP or 2000
To check your PC's TCP/IP configuration:
On the Windows taskbar, click the Start button, and then click Run.
1.
The Run window opens.
Type and then click OK.
2.
cmd
A command window opens
Type
3.
ipconfig /all
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
• The IP address is between 192.168.0.2 and 192.168.0.254
• The subnet mask is 255.255.255.0
• The default gateway is 192.168.0.1
Type
4.
exit
Preparing Your PCs for Network Access C-11