Installation Guide for the NETGEAR Dual Band Wireless PCI Adapter WAG311
Install the WAG311 Wireless PCI Adapter
and Antenna.
Prepare suitable clothing and work space
a.
with adequate room which is free of
sources of static electricity.
Power off your computer and disconnect
b.
the power cord.
Open the case of your PC.
c.
Identify an available PCI slot.
d.
Insert the NETGEAR Dual Band
e.
Wireless PCI Adapter WAG311 into
your PC.
Basic Setup
Install the WAG311
Note: Be sure the WAG311 Wireless PCI Adapter is
fully seated in the PCI slot.
2-9