NETGEAR WAG311 Installation Manual page 23

Installation Guide for the NETGEAR Dual Band Wireless PCI Adapter WAG311
Mount the antenna in the stand.
f.
Connect the antenna to the adapter and
position the antenna to the up position.
Reconnect the power cord and reboot the
computer.
Close the PC, attach the power cord, and
g.
follow the instructions below for your
version of Windows to proceed with
installing the software.
The Found New Hardware Wizard
h.
displays. Click Next and follow the
prompts to proceed.
Click Continue Anyway if you are
prompted with a Windows XP Logo
testing message.
After the installation completes, click
i.
Finish to close the wizard.
You should see the WAG311 system tray
icon on the lower right portion of the
Windows task bar.
Windows XP will display a Wireless
j.
Network Connection message.
Basic Setup
Mount the antenna in the stand
The antenna base is magnetic. Please
Note:
be careful to place this base in a location
away from floppy disks, computer disk
drives and other devices adversely affected
by magnetism.
Add New Hardware Wizard
WAG311 System Tray Icon
Windows XP Network Connection Alert
2-5