NETGEAR WAG311 Installation Manual page 29

Installation Guide for the NETGEAR Dual Band Wireless PCI Adapter WAG311
Configure your WAG311.
Open the WAG311 Smart Wireless
a.
Settings Utility by clicking on the icon in
the Windows system tray. The utility
opens to the Settings page.
Change the Network Name SSID to
b.
match your network.
Tip: As an alternative to typing in the
SSID, you can use the Network tab to
view the available wireless networks.
Double-click on the desired network.
Click the Apply button to activate the
c.
connection.
Enter a name for your profile and click
d.
the Save Profile button to store the
current settings.
Note: This procedure assumes you are
connecting to a wireless network which is not
using WEP security. If your network includes
WEP settings, enter the security information
in the Security section. For help with these
steps, see "Enabling Wireless Security
Features" on page
Basic Setup
3-8.
Click here to open the configuration utility.
WAG311 system tray icon
WAG311 Configuration Utility
Note: The NETGEAR default settings are
Infrastructure mode, with Any for the wireless
network name SSID, and WEP disabled.
2-11