Table of Contents
Advertisement
C700 | C720 Series Operating Manual
Menu Structure
Press
[MENU] key to enter programming mode:
If the monitor prompts you to enter the calibration security password, press the
password, and then press the
pressing the
[ENT]
Item
Display
Sensor
Configure
Temperature
Standard
Solution
Calibration
Calibration
Field Calibration
[ENT] key to confirm the calibration security password. No initial password here, please enter directly by
Selection
Type
Unit
Electrode Constant
Temperature Coefficient
Temperature Sensor
Temperature Offset
Temperature Input
Temperature Unit
Calibration Point 1
Calibration Point 2
Calibration Point 3
Calibration Point 4
Calibration Point 5
Calibration Adjustment
Field Calibration
Offset Adjustment
Slope Adjustment
or
key to set the calibration security
Sub Menu
EC
TDS
Salinity
Resistivity
µS/cm
mS/cm
ppm
ppt
%
1.0 (Default, can be modified)
2.0 (Default, can be modified)
NTC2.252 kΩ
NTC10 kΩ
Pt100
Pt1000 (Default)
0.0000 (Enter Value if Required)
Automatic
Manual
°C
°F (Default)
0.01 μS/cm/cm (Default, can be modified)
1413mS/cm (Default, can be modified)
12.88mS/cm (Default, can be modified)
111mS/cm (Default, can be modified)
800 mS/cm (Default, can be modified)
Voltage 1 (Default: 00.010)
Voltage 2 (Default: 1413)
Voltage 3 (Default: 012880)
Voltage 4 (Default: 149812)
Voltage 5 (Default: 800000)
00.010 (Default)
00.000 (Default)
01.000 (Default)
◀ ◀
8
|
Advertisement
Table of Contents
