Installation Location; Installing The Indoor Unit - Mitsubishi Electric Mr. Slim PCH-GAK Installation Manual

. Installation location
Fig. -1
3. Installing the indoor unit
1 2
4 5
7 8
Fig. 3-1
Fig. 3-
Fig. 3-3
2.1. Outline dimensions (Indoor unit) (Fig. 2-1)
Models
PC-2, PCH-2
PC-2.5, 3,
PCH-2.5, 3
PC-4, PCH-4
PC-5, 6,
PCH-5, 6
Warning:
Mount the indoor unit on a ceiling strong enough to withstand the weight of
the unit.
F Obstacle
G Floor
H Installation height
3.1. Check the indoor unit accessories (Fig. 3-1)
3
The indoor unit should be supplied with the following accessories (contained in the
inside of the intake grille).
6
1
2
3
4
5
6
7
8
3.. Preparation for installation (Fig. 3-)
3..1. Suspension bolt installing spacing
3... Refrigerant and drain tubing location
A Front side outlet
B Left side outlet
C Right side outlet
D Independent piece (Removable)
(mm) 3..3. Selection of suspension bolts and tubing positions (Fig. 3-3)
Using the pattern paper provided for installation, select proper positions for sus-
pension bolts and tubing and prepare relative holes.
A Pattern paper
B Suspension bolt hole
C Indoor unit width
Secure the suspension bolts or use angle stock braces or square timbers for bolt
installation.
A Use inserts of 100 kg to 150 kg each.
B Use suspension bolts of W3/8 or M10 in size
∗ The numbers in parentheses apply to the PC-4, 5, 6, PCH-4, 5, 6 model.
W D H
A
1000 680 221 Min. 270
1310 680 221 Min. 270
1310 680 281 Min. 270
1620 680 281 Min. 270
Accessory name
Washer
Pipe cover
Pipe cover
Band
Joint socket
Socket cover
Drain tubing cover
Wired remote controller
Models A B
PC-2, PCH-2 933 1000
PC-2.5, 3,
1240 1310
PCH-2.5, 3
PC-4, PCH-4 1240 1310
PC-5, 6,
1547 1620
PCH-5, 6
Models D E
PC-2, 2.5, 3,
131 175
PCH-2, 2.5, 3
PC-4, 5, 6,
191 235
PCH-4, 5, 6
E Right drain tubing
F Left drain tubing
G Gas tubing
H Liquid tubing
(mm)
B C E
Min. 300 Min. 500 Max. 250
Min. 300 Min. 500 Max. 250
Min. 300 Min. 500 Max. 250
Min. 300 Min. 500 Max. 250
Q'ty
4 pcs
1 pc Large size (For gas tubing)
1 pc Small size (For liquid tubing)
4 pcs
1 pc Marked with "UNIT"
1 pc
1 pc
1 pc
(mm)
C
221
221
281
281
(mm)
F
178
238
3