Troubleshooting; Basic Functioning; The Storage Area Network Has No Power; No Lights Are Lit On The Storage Area Network - NETGEAR SC101 Reference Manual

This chapter provides information to help troubleshoot your Storage Central SC101. Basic
functioning, troubleshooting tips, and frequently asked questions are included.
Note: For up-to-date SC101 installation details and troubleshooting guidance visit
http://kbserver.netgear.com.

Basic Functioning

If you have trouble setting up your SC101, check the tips below.

The storage area network has no power

• Make sure the power cord is connected to the storage area network.
• Make sure the power adapter is connected to a functioning power outlet. If it is in a power
strip, make sure the power strip is turned on. If it is plugged directly into the wall, verify that it
is not a switched outlet.
• Make sure you are using the correct NETGEAR power adapter supplied with your storage area
network.

No lights are lit on the storage area network

It takes a few seconds for the status light to be lit. Wait a minute and check the status light on the
storage area network.
v1.0, September 2005
Chapter 7

Troubleshooting

7-1