Configuration; Understanding The Wizard Setup Mode And The Advanced Configuration Mode - NETGEAR SC101 Reference Manual

There are a variety of ways you can configure your Storage Central SC101.This chapter describes
how to use the wizards to configure your SC101.
Understanding the Wizard Setup Mode and the Advanced
Configuration Mode
You can choose to configure the Storage Central SC101 with Wizard Setup mode or Advanced
Configuration mode. The table below explains both of these options.
Table 5-2
Configuration Option
Wizard Setup Mode
Step-by-step screens help you add or
modify drive space (also known as
partitioning).
Wizard Setup is explained in this
chapter.
Advanced Configuration Mode
Pick an choose tasks without step-by-
step guidance.
See Chapter 6, "Advanced

Configuration

for step-by-step
instructions on how to use these
options.
Available Tasks
• Name/rename drive partition.
• Change drive partition password
• Add capacity to a drive partition
• Attach any available drive partitions
• Share a drive partition
• Detach a drive partition
• Delete a letter drive partition)
All of the above plus:
• Change the Storage Central admin password
• Upload new firmware to an SC101
• View SC101 status information
• Change the hard disk name
• Recover orphan drive partitions when a user
on a PC detaches the drive but does not
delete it from the disk.
v1.0, September 2005
Chapter 5
Configuration
Comment
Best for first
time users.
Best for
experienced
users.
5-1