Attaching Drives - NETGEAR SC101 Reference Manual

Reference Manual for the NETGEAR Storage Central SC101

Attaching Drives

When you first create a shared drive it is only available to the PC that you were using when you
created it. If you want to use the shared drive from other PCs, then you must run the Storage
Central Manager software on that PC and attach the drive. You only need to attach the drive once.
From that point onward, the PC will be able to use the shared drive.
To attach a drive, follow the instructions below.
1. From the Wizard Option screen,
select Attach Drive.
2. If prompted, enter the password for
the drive.
3. Click Attach Drive and follow the
prompts.
5-6
Figure 5-7
v1.0, September 2005