Troubleshooting Tips; Always Restart Your Network In This Sequence; Check The Status Lights To Verify Correct Operation; Technical Support - NETGEAR SC101 Reference Manual

Reference Manual for the NETGEAR Storage Central SC101

Troubleshooting Tips

Here are some tips for correcting simple problems you may have. For additional help, see Chapter
7, "Troubleshooting" .

Always restart your network in this sequence:

1. Turn off and unplug the modem, turn off the router, shut off the SC101, and shut down the
computers.
2. Plug in and turn on the cable or DSL modem. Wait about two minutes.
3. Turn on the router. Wait about one minute.
4. Turn on the SC101.
5. Turn on the computers.

Check the status lights to verify correct operation.

When powered on, the SC101 power light will be on. When connected to an operational Ethernet
network, the Ethernet status light will be lit. The label on the SC101 identifies these status lights.

Technical Support

Thank you for selecting NETGEAR products. After completing the Smart Wizard configuration
assistant, locate the serial number on the bottom label of your product and use it to register your
product at http://www.NETGEAR.com/register.
3-9
v1.0, September 2005