Me103 Wireless Access Point Front Panel - NETGEAR ProSafe ME103 Reference Manual

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

ME103 Wireless Access Point Front Panel

The ME103 Access Point provides three status LEDs.
ProSafe Wireless Access Point
802.11b
PWR
Figure 2-1: ME103 front panel
The following table explains the LED indicators:
LED DESCRIPTION
Power Power Indicator
No power. If this LED does not come on with the power adapter and cord correctly
Off
installed, see Chapter 4, Troubleshooting.
Power is on.
On
Blink Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going on steady.
LAN Ethernet LAN Link Activity Indicator
Off Indicates no Ethernet link detected.
Green On 100 Mbps Fast Ethernet link detected, no activity.
Green Blink Indicates data traffic on the 100Mbps Ethernet LAN.
Amber 0n 10 Mbps Ethernet link detected, no activity.
Amber Blink Indicates data traffic on the 10Mbps Ethernet LAN.
Wireless LAN Wireless LAN Link Activity Indicator
Off Indicates no Ethernet link detected.
Green On Wireless link enabled, no activity.
Green Blink Wireless link activity.
2-6
MODEL
LAN Wireless LAN
August 2003
ME103
Introduction