Monitoring Modes (Rm7766Hd-2 Only); Night Light - VTech RM7766HD User Manual

Monitoring Modes (RM7766HD-2 only)

When more than one baby unit is paired to the parent unit, you can choose to view
different baby units in three monitoring modes. Learn more about each below:
Single Mode
Split Mode
Patrol Mode
Change the Monitoring Mode
1� Press MENU/SELECT when the parent unit is idle.
2� Press MENU/SELECT or
3� Press to choose between Single
or
monitoring mode options. Press MENU/SELECT to confirm.

Night Light

You can control the night light remotely on the parent unit or directly on the baby
unit.
On the Baby Unit
Tap the Night Light Control Key
on/off the night light.
Tap and hold the same key with
the light on to adjust the night
light brightness.
The screen displays images only from the selected
baby unit in full screen.
The screen displays images from all paired baby
units at the same time in split view.
The screen displays a single cam view that
transitions to a different baby unit every 10
seconds.
to enter Monitoring Mode menu.
located on the top of the baby unit to turn
27
, Split , and Patrol