Panasonic PT-VX431K Operating Instructions Manual page 98

Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status]
screen, click it to display the error/warning details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
PT-VX431K
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning.
r [FAILED] items displayed when a problem occurs
Parameter
[FAN]
[FAN(INTAKE)]
[FAN(LAMP)]
[FAN(EXHAUST)]
[INTAKE AIR TEMPERATURE]
[EXHAUST AIR TEMPERATURE]
[OPTICS MODULE TEMPERATURE]
[LAMP REMAIN TIME]
[LAMP STATUS]
[APERTURE (CONTRAST-SHUTTER)]
[INTAKE AIR TEMP.SENSOR]
[OPTICS MODULE SENSOR]
[EXHAUST AIR TEMP.SENSOR]
[AIR FILTER]
[COVER OPEN]
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
98 - ENGLISH
Chapter 5 Operation of Function - Web control function
000000000
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
Trouble has occurred in the intake fan.
Trouble has occurred in the luminous lamp cooling fan.
Trouble has occurred in the exhaust fan.
The air intake temperature is too high. The projector may be used in an operating environ-
ment where the temperature is high, such as near a heating appliance.
The exhaust air temperature is high. The air exhaust port may be blocked.
The temperature around the optics module inside the projector is high. The projector may
be used in an operating environment where the temperature is high, such as near a heating
appliance.
The luminous lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the luminous lamp.
The luminous lamp has failed to light.
Wait a short while for the luminous lamp to cool off, and then turn on the power.
Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
Trouble has occurred in the sensor used to detect intake air temperature. Consult your
dealer.
Trouble has occurred in the optics module sensor. Consult your dealer.
Trouble has occurred in the sensor used to detect exhaust air temperature. Consult your
dealer.
There is too much dust accumulated in the air filter unit. Turn off the projector and unplug the
power plug from the wall outlet, then replace the air filter unit.
The cover is open.
Description
1