Table of Contents
Advertisement
USB display function
The USB display function makes it possible to project the image and audio from the computer through a USB
converting cable.
When using the USB display function on Mac, the audio output is disabled.
When using on a Windows computer
r Operating environment
OS
CPU
Amount of memory
Hard-disk free space
Display
f There is no guarantee for all the computers that meet the above conditions will operate properly.
Projecting the USB display
Note
f The USB display function and the Presenter Light software cannot be used at the same time. Before using the USB display function,
terminate the Presenter Light software.
1)
Connect the <USB B (DISPLAY)> terminal of the projector to a computer with a USB cable.
2)
Press the <MEMORY VIEWER/USB DISPLAY/NETWORK> button on the remote control or switch the
input source to USB DISPLAY.
f You can also press the <INPUT SELECT> button on the control panel and select the input source in the
input guide.
f The startup screen will be displayed automatically due to the driver which is built-in the projector, and
executing the installation according to the instructions of the screen. The displaying of the auto installation
screen is depending on the settings of computer. In this case, please select "Run autorun.exe". Please
double-click "autorun.exe" in the folder of the "USB Display" when the automatic startup is disabled.
f The computer screen is projected.
3)
Click the driver icon
up menu.
f Pop-up menu is only displayed in English.
f The item which is displayed in gray is unavailable.
[Active audio] / [Disable audio]
[Play video] / [Pause video]
[Start] / [Stop]
[Exit]
Note
f It will take a while when you want to project the computer screen.
f Connect a USB cable directly to the USB connector of a computer. It will not work when connecting through a USB hub.
f At the time that the computer screen is projected, the resolution of the computer may be forcibly changed depending on the combination of
computer and projector.
Termination of the USB display
1)
When terminating the USB display, remove the USB cable directly.
f There is no need to follow "Remove hardware safely" when a USB cable is disconnected.
88 - ENGLISH
Chapter 5 Operation of Function - USB display function
Windows 7 32/64 bit, Windows 8.1 32/64 bit, Windows 10 32/64 bit
Intel Core 2 Duo 2.0 GHz or faster, the compatible processor
256 MB or more (Recommended : 512 MB or more)
20 MB or more
Resolution 640 x 480 or more, 1 600 x 1 200 or less
in the task tray (bottom right of the computer) and select one item in Pop-
Set whether to output the audio from the computer.
Switch between playing and pausing the image.
Set whether to display the image from the computer.
Displayed in gray and cannot be selected.
Advertisement
Chapters
Table of Contents
